This article will go over what dryfiring is, how it improves your shooting, what the DryFireMag is, and how to incorporate it into your training. It will also cover ways to use the DryFireMag to maximize your practice sessions and keep the boredom to a minimum.
TLDR: The DryFireMag is a magazine-shaped training aid that is inserted into the magazine well of your normal carry gun. This specialized dry fire magazine uses two internal springs to simulate the trigger breaking and resetting from shooting. It eliminates the need to rack your slide to reset your trigger after you “fire” a shot. It’s a good addition to your gear, but I think it really shines when paired up with other dryfire training tools, like a Mantis X10, Mantis Laser Academy, Virtual-Shot, or other similar laser-based training aids. That way, you can practice all aspects of shooting with everything but the loud bang and recoil. The only couple of cons I have for the DryFireMag is that you can’t practice reloads and the cost… It’s about $100 for a basic model and $300 for a laser-enabled model. It’s not exactly chump change, but it’s worth it if you’re serious about training and improving your shooting. For the cost of a few boxes of ammo, you get unlimited trigger resets and some seriously effective training potential. The DryFireMag is made in the USA.
I am affiliated with DryFireMag, Mantis and Next Level Training. All of the DryFireMag and Mantis products that I currently have were provided by DryFireMag and Mantis for testing and review at no cost to me. Also, I have provided paid product photography for Mantis in the past.
Most of the links in this article are affiliated (either directly with the brand referenced or with a major distributor of that brand – i.e. Brownells, EuroOptic, Sportsman’s Guide, etc.). I receive a small commission on any sales generated, but there is no additional cost to you. We really appreciate your use of our affiliate links, as this is part of what helps us do what we do. Thank you!
I never endorse or recommend products that I don’t personally trust and use. I take all of my recommendations very seriously because your life may depend on it.
Some links are to Amazon, and as an Amazon affiliate, I earn from qualified purchases.
What Is Dryfiring And Why Should You Do It?
Dryfire is used to practice individual components of the shooting process – your draw, grip, sight picture, presentation, trigger squeeze, follow through, reloading, moving, tracking targets, etc. It’s basically “shooting” without the added cost of using ammo and traveling to the shooting range. It’s a very simple, easy, and cost-effective way to get better at shooting without spending a dime on expensive hole punches (we’re talking about bullets if you missed that…).
When I was on the All Guard International Shooting Team, we would always dryfire for quite a while before actually shooting live rounds, especially for matches. There is a lot that goes into a “perfect shot,” and the loud boom and recoil produced from live fire is only a small part of it. For pistols, specifically, you have to establish your grip, draw from a holster, establish your non-firing hand grip, press the gun out, align your sights, and squeeze the trigger.
If you want to get really good at shooting, and I mean REALLY good, you will spend more time dryfiring and practicing every individual aspect of that firing sequence that I just described than you will in actually shooting live rounds. Of course, shooting is fun, but if you don’t know what you’re doing wrong or how to improve it, it just becomes a very expensive way to make noise and poke holes in paper.
My Gun Shoots Low and Left!
Let’s have a quick discussion on this very common complaint I’m sure you’ve heard other shooters say. You would never claim your gun shoots low and left, of course – this is just talking about your neighbor who still hasn’t returned that tool he borrowed last year…
Anyway, which do you think is more likely?
Glock, the multibillion-dollar international manufacturing company that owns 65% of the market share of handguns in the United States alone, has a consistent alignment problem with their hundreds of millions of dollars in CNC milling machines. For some reason, they just refuse to address it; and as a result, all of the guns they produce shoot low and left.
OR
The individual shooting the gun either has some misconceptions about how sights work or they have a tendency to anticipate the recoil of the handgun and, trying to combat it (incorrectly), they subconsciously jerk the gun when firing, which causes the infamous low and left issue. There are a lot of other factors that can contribute to accuracy issues, but that’s an example.
Obviously, it’s not the gun’s fault, and your sights are 99.9% perfectly aligned. The problem that you, or your “friend” in this case, is having is a lack of training and focused practice. We humans are pretty good at various things, but if you don’t take the time to practice and improve when you’re first learning something, odds are that the results are going to be mediocre at best. This is where a training tool like the DryFireMag comes in handy.
What is the DryFireMag?
The DryFireMag is an innovative dryfire training tool designed to reset a pistol’s trigger without the need to rack the slide after each shot. This device is installed just like a standard magazine in your firearm and incorporates a spring mechanism that automatically resets the trigger, enabling continuous dryfire practice without interruption. Additionally, it features tactile trigger simulation, which mimics the feel of an actual trigger pull, providing realistic feedback and making dry fire practice more effective and engaging.
How Does the DryFireMag Work?
The DryFireMag operates by utilizing an internal spring mechanism and a lever that interacts with the trigger bar. When a user pulls the trigger, the mechanism resets the trigger, allowing for multiple trigger pulls without manual slide racking. This design ensures the training experience is both efficient and closer to real live-fire practice while maintaining firearm safety.
How To Adjust The DryFireMag Trigger Pull Weight
Each DryFireMag uses two internal coil springs to simulate the weight and feel of your handgun’s trigger. If you’re using a competition trigger or other super light trigger, you can actually remove the top spring entirely to get the lightest simulated pull weight possible. I have two DryFireMags on hand I used for testing: one for my Agency Arms S&W M&P and one for my Glock 17. In my testing with a trigger pull gauge, my S&W M&P trigger was pulling at 2.5 lbs without the DryFireMag (it has an Apex Precision trigger) and right at 5 lbs with the top spring removed from the DryFireMag. Does it perfectly match the aftermarket trigger weight and feel? No, but it does a great job resetting the trigger and allowing me to simulate shooting multiple targets without breaking my grip or inducing bad training habits. The increased trigger weight is both positive and potentially negative in this case. More weight means my finger will easily pull the lighter trigger when shooting live ammo; however, if I’m working on prepping the trigger (taking up all the slack in the trigger and applying some pressure, but not enough to fire), the added weight from the DryFireMag can potentially throw off my muscle memory. Keep in mind, this is more advanced-level stuff and isn’t really applicable for most people just wanting to improve their shooting.
The DryFireMag has an optional spring kit that allows you to change the trigger pull weight from approximately 5 – 9lbs. In my testing with a Lyman digital trigger pull gauge and my S&W M&P, the standard spring that came with the DFM pulled at 5lbs 11oz, and the the green spring (heaviest) pulled at 7lbs 14oz.
Does a Glock Trigger Reset After Dryfiring?
A Glock’s trigger does not reset during dryfiring without manually cycling the slide. This normally happens from the recoil of a live round cycling the slide to feed the next round into the chamber. The DryFireMag, however, allows the trigger to reset automatically, enhancing the training process by eliminating the need to rack the slide after each shot. Dryfiring a Glock will not damage it.
DryFireMag's Benefits
Improve Your Accuracy and Speed
Regular use of the DryFireMag can significantly enhance a shooter’s accuracy and speed by enabling repetitive practice without the delays caused by manual slide racking. This focused, uninterrupted practice can lead to better muscle memory and shooting proficiency. The last thing you need in a real-world self-defense shooting situation is to fire one shot and then pointlessly rack the slide because you’re so used to doing that in training. You are training…right?
Get Familiar with Your Own Pistol and Trigger
Using your own handgun and holster to practice with is a huge advantage. Adding the power of a resetting trigger to your practice on top of that is even better. The DryFireMag allows you to practice with your normal carry gun and equipment, instead of using a different dedicated training pistol like a SIRT, for example.
No Potential Damage to Your Firearm
The design of the DryFireMag ensures that there is no potential for damage to the firing pin or trigger mechanism, making it a safe option for extended dryfire practice sessions. The notion that you should never dryfire is pretty much false across the board for most modern guns, with the only exception being rimfire models. Dryfiring your Glock or a similar striker-fired handgun will not cause any damage or issues. The DryFireMag doesn’t rely on the striker spring in any way to function, so there isn’t any wear or issues to worry about.
DFM Is Compatible with the Mantis X10 Elite and Other Laser Based Training Aids
The DryFireMag can be utilized alongside the Mantis X10 Elite training system, optimizing the dryfire experience by providing comprehensive feedback and analysis. The Mantis X10 is arguably the most effective dryfire training aid to diagnose and improve any issues you may be having, so the fact that it works seamlessly with a DryFireMag is a huge plus. Normally, to use a Mantis X10, you would have to manually rack the slide after each shot, but the DryFireMag takes care of that problem, meaning you can “fire” multiple shots and really take your shooting practice to the next level. The Mantis X10 can also provide audible feedback during training, enhancing the realism and effectiveness of your practice.
The DryFireMag is available for several different types of pistols and also offers the added feature of a laser to some models. This laser version only works with the included laser bullet that comes with the laser enabled DryFireMag. Unfortunately, any laser cartridges you may currently have will not work with a DryFireMag because it does not rely on the striker or striker spring to function, so the laser bullet would never actually be activated by your striker. The dedicated DryFireMag laser bullet uses infrared light to activate the laser, which is super cool.
This combination of training aids can also be used with any laser based dryfire training tools currently on the market, including Mantis Laser Academy, the Virtual-Shot App, laser activated training tools, and Smokeless Range products, if you’re a serious shooter. None of these additional training aids are required to use the laser enabled DryFireMag – you could just throw a scaled-down target on the wall and track your own hits if you’d like.
Virtual-Shot is a smartphone application that uses a mount attached to your handgun or rifle along with your phone to display a number of different shooting scenarios with static and moving targets. The movement of your phone (which is attached to your gun) is translated as movement in the app, allowing you to “shoot” multiple targets in all kinds of fun ways. The DFM is an awesome companion to the Virtual-Shot app because it eliminates the need to rack your slide after every shot, which is a lot more effective for training, especially when the zombie hordes are about to overrun your position. Virtual-Shot also works very well with recoil-enabled airsoft guns, like the Glock 19 replica I’ll be talking about in a minute.
Drills To Effectively Practice Shooting With a DryFireMag
Okay, so you’ve got this fancy trigger resting magazine thing, now how do you train with it to maximize your time and efforts to improve? Here are a few drills and ideas for you to implement into your practice sessions to keep the boredom to a minimum.
Trigger Cadence
Improve your trigger control and speed by practicing consistent, steady trigger pulls without the need to rack the slide manually. This is a drill that you literally cannot do without a training aid like the DryFireMag. The idea behind practicing trigger cadence is to have a consistent rhythm to your shooting that allows the most control over recoil management and follow-up shots. The space between shots is called a “split time” and you’ll see very consistent splits from very high-level shooters. For example, if you watch a few of Jerry Miculek’s videos (he’s literally the best all-around shooter in the world, so I cannot recommend enough that you follow and learn from him), you’ll see that his split times are typically very similar through each string of shots. It’s very common to see him laying down consistent strings (series of shots) with 0.14 – 0.16 seconds between each shot.
Don’t expect anywhere near that level of speed and consistency if you’re just starting out. Remember, the best shooters in the world are literally the best, and they didn’t get that way overnight. Jerry Miculek has been shooting at the world championship level longer than I’ve been alive, so give yourself some grace, and don’t expect perfection right out the gate.
Your goal for practicing cadence is just to establish a consistent rhythm between each shot. You can start out super slow and count seconds out loud while you squeeze the trigger – “one thousand one (pull), one thousand two (pull),” and so on. This can be done with a partner counting for you and gradually increasing the speed until you can’t keep up consistently. You can also use a shot timer that’s sensitive enough to pick up the sound of the DryFireMag spring actuation. Using a timer is the ideal solution because it will give you very precise numbers for your splits, and you can really get down into the fractions of a second times if you work at it. Additionally, you can log your practice sessions to track your progress and identify areas for improvement.
Draw and Fire on a Par Timer
In a self-defense shooting situation, your life and the lives of others may very well depend on your ability to draw from a holster, align your sights on the threat, and fire. Drawing from a holster, especially a concealed holster, is one of the most commonly overlooked and forgotten aspects of training. You may be able to shoot the wings off a fly at 50 feet, but if it takes you more than 2.5 seconds to draw and fire accurately, you’re in bad shape. If you don’t believe me, do yourself a favor and go watch several self-defense shooting videos from Active Self Protection. It’s one thing to sit on a soap box and preach about all the aspects of self-defense shootings, but it’s a whole different story when actually watching real footage and breaking down everything that went well, in addition to everything that didn’t. I’m not affiliated with John Correia or Active Self Protection in any way, but I do love to point people in their direction, especially for concealed carry situations.
A great shot timer I recommend is the Club Timer III from PACT. It’s very widely used in competitive shooting sports around the world and is relatively affordable. One important thing to note though is that the Club Timer III from PACT is designed to work with live fire and generally relies on the noise and concussion of gunshots to register shots accurately. It may not be sensitive enough to consistently work with a DryFireMag, which simulates the trigger pull and reset of a firearm without producing the noise and impact of live fire.
DryFireMag does not produce the loud sound typically needed to trigger shot timers like the Club Timer III. Some advanced shot timers or apps might have settings or increased sensitivity to work with dry-fire training tools. However, a standard shot timer may not accurately register the “shots” from a DryFireMag.
For dry-fire practice, you may need to explore other options specifically designed for detecting dry-fire sounds or impulses, such as the Mantis X10 and the free Mantis app. There are other free smartphone apps designed to work as shot timers; however, I have not yet personally tried any of them to see how well they work and if they would work with a DryFireMag.
Draw and Fire Multiple Shots from Concealment
Taking the last two suggestions up a notch, this drill assists in practicing multiple target engagements and rapid firing from a concealed carry holster, emphasizing quick response times and accurate follow-through. You can change it up to fire three shots on a single target or multiple targets. I would suggest doing variations of both, including shooting from awkward positions, behind cover, and while moving, as well as one-handed (alternating hands). There are no rules in a gunfight, so think outside of the box and make sure to practice as much as possible.
DryFireMag's Limitations
Despite its benefits, the DryFireMag has certain limitations:
– It does not perfectly replicate the feel for all gun triggers.
– It prevents practicing reloads or malfunction clearing drills as it occupies the magazine well.
– The cost can be a limiting factor for some people.
– The DFM will not work with any laser bullets you may already have.
Observable Pros and Cons
Pros:
– Compatible with multiple firearm models including Glock, Springfield XD, and SIG Sauer P320 (not one-size-fits-all, so you will need a separate DFM for each model).
– Safe for firearm components due to non-interaction with the firing pin.
– Enhances dryfire training efficiency and firearm familiarity.
Cons:
– Trigger feel may vary from the actual trigger pull experience.
– Ineffective for practicing reload and malfunction drills.
– The weight of the DFM is less than a loaded magazine.
– Laser bullets you may already have will not work with the DFM. (You will need to buy a dedicated DFM laser system.)
Compatible Guns List
The DryFireMag currently supports popular models such as the Glock, Springfield XD, SIG Sauer P320, and SIG Sauer P365. More guns will most likely be added over time, as demand increases for them. Each DryFireMag is molded to fit the specific magazine profile of each gun. Any firearm based on a Glock will also work. For example, the Palmetto State Armory Dagger and Shadow Systems MR920 are both compatible with the Glock variant DryFireMags.
Dryfire Mag Laser Options
DryFireMags do not work with standard laser bullets you may already have. Because the design of the DFM doesn’t interact with the pistol’s striker at all, a standard laser bullet will not ever be activated. DryFireMag has teamed up with Laser Ammo to solve this problem. The SMART variant DryFireMag includes a proprietary Laser Ammo cartridge that is activated with infrared light that is emitted from the DFM when you squeeze the trigger. You can see the IR bulb on the DFM pictured above on the left, just behind the vertical piece at the top. That bulb is activated by a pressure switch behind the main spring, which then activates the laser bullet. That’s a super cool way to solve that problem and bring a whole new level of training with the addition of a visible laser. Well done, guys!
Laser-enabled DryFireMags are currently available for SIG P320, Glock 43X/48, and full size Glocks (and Glock based variants). All of these laser-enabled options would work perfectly with any laser-based training system on the market.
How Much Is The DryFireMag?
The DryFireMag is available for several different types of handguns and features. Basic DryFireMags are currently $98.99 each. If you’re looking for the ability to use a laser along with your dryfire training, you’ll need one of the laser-enabled DryFireMags, which are currently $299 each and are only compatible with the included light-activated laser bullet. If you’re absolutely all-in and dead serious about the most effective training possible, the latest addition the DryFireMag suite of tools is their new GAIM X. This is a collaboration project with GAIM, a virtual reality hunting and shooting simulator that was developed by Aimpoint. The GAIM X DryFireMag is currently $590 plus the cost of a compatible VR headset: Meta Quest 2, Quest Pro, or Meta Quest 3. This is obviously not the cheapest way to train, but it is arguably the best because it allows you to be fully immersed in virtual reality while using your own gun to “shoot” active targets.
DryFireMag Alternatives
Manually Rack the Slide
The most basic alternative to the DryFireMag is manually racking the slide after each trigger pull. While more cumbersome, it does allow for practice with trigger control and can be integrated with other aspects of dryfiring such as sight alignment and grip. The biggest advantage of this method is that it’s completely free and doesn’t require any additional tools other than a standard handgun.
There are several cons with manually racking your slide after each shot:
1. Interrupts Practice Flow – constantly racking the slide breaks the flow of practice, making it less efficient and less focused.
3. Develops Bad Habits – manual slide racking does not mimic real shooting conditions, which could lead to developing habits that do not translate well to live fire situations.
4. Time-Consuming – each additional step to rack the slide elongates the practice session, reducing the number of effective repetitions you can achieve within a set time frame.
5. Breaks Concentration – the need to constantly rack the slide can disrupt mental focus and concentration, which is critical for effective training.
6. Inconsistent Training – as the act of racking the slide is not part of the actual shooting sequence, it results in inconsistent and less realistic dryfire training.
7. Physical Fatigue – excessively racking the slide can lead to physical fatigue, especially during extended dryfire sessions, limiting the duration and effectiveness of practice.
Keep Your Gun Out of Battery
Another method involves keeping the gun slightly out of battery. This way, you can pull the trigger multiple times without fully resetting. However, this method does not simulate an accurate trigger pull and reset. It basically turns the trigger into a squishy feel, which isn’t realistic or particularly effective.
Use Laser Training Pistols
Laser training pistols, such as the SIRT (Shot Indicating Resetting Trigger) Pistols, are designed specifically for dry fire practice and provide immediate feedback with a laser dot, showing exactly where the shot would have landed. I’ve used my SIRT 107 several times in classes working with students, and it makes a huge difference having a tool like this on hand. A laser-enabled DryFireMag would be equally effective with the huge benefit of using your, or your student’s, own firearm, rather than a training pistol.
Use Recoil Enabled Airsoft Pistols
High-quality airsoft pistols can replicate the feel of your firearm’s trigger and provide a cost-effective way to practice shooting drills. They often have a similar weight and trigger pull to real firearms and can be used for both dry and live fire exercises. If you spend a few extra dollars, you can also have the added benefit of C02 or “green gas” enabled recoil. I have a licensed Glock 19 recoil-enabled airsoft pistol, which my wife especially likes. Something like this is excellent for brand new shooters because you can get all of the aspects of live fire, including a projectile, just dialed way down from a normal handgun. I haven’t measured the recoil or sound levels of our airsoft pistol, but I’d guess the recoil is around 30–50% less than a live gun, and the sound is significantly less. If you do decide to go down the rabbit hole of gas blowback airsoft pistols, make sure to get an officially licensed version so it will work with any holsters you may already have. You can get this exact Glock 19 replica gas blowback version on Amazon for about $130.
DryFireMag Reviews
The overwhelming feedback for a DFM from users is very positive. Their Amazon listing currently has over 1,500 reviews at the time of writing, with a score of 4.4 out of 5. The DryFireMag website has another several hundred reviews, all mostly positive. For the sake of addressing questions or concerns you may have, I’d like to go over some of the negative reviews for the DryFireMag I was able to find on Amazon and a couple other places to hopefully clear up some of the confusion.
I have not edited these reviews in any way, including spelling and punctuation:
One of the top critical reviews on Amazon says,
“The first time you insert the magazine, the trigger pull is closest to the real thing, but after that, each pull is far less. For the price, this should not be a problem, and since it does not work with any lasers, for the same price you'd be better off going with a laser trainer.”
Another critical review states,
“It -never- occurred to me the mag only resets the trigger, not the striker. Completely useless for my purpose.”
A few things are different now versus when those reviews were written a few years ago. DryFireMag now offers laser-compatible versions like the one featured in this review. The laser cartridge is made by Laser Shot, one of the leading manufacturers in the dryfire and laser training space. Another improvement in the design of the Dryfire Mag is the adjustability of the trigger pull weight and “break” point. The laser version of the Dryfire Mag will only work with the included laser cartridge from Laser Shot. The Smart DryFireMag has a built-in IR light that is detected by the laser to fire when the trigger is pulled, so any traditional laser bullet that relies on the firing pen pushing a button on the laser will not work.
If you’re planning on buying a DryFireMag to use along with a laser cartridge you already have, trust me, it will not work. The DryFireMag does not release the striker, so the laser cartridge would never be activated. The only way to get a laser along with the trigger reset is to pick up one of the laser-enabled DryFireMags.
A couple other reviews I’d like to address are about the DryFireMag not working with a Mantis X:
“I bought this to use it with a MantisX training system mounted on my G21SF. I didn't see anyone else talk about experience with this and the Mantis. In theory it would be great, no more racking the slide every time in drills. However the little "click" in the DryFireMag just doesn't create a strong enough vibration for the Mantis to sense like it does when the firing pin falls and produces a MUCH stronger result. As feedback to the DryFireMag folks, if you could find a way to have a stronger action of some sort at the trigger break it would be fantastic. None of this is the fault of either product. Both products do what they're designed to do and live up to their promises. They just don't work together. I thought I'd share this so others would see it if you're thinking of using it this way like I was. Overall I'd give the DryFireMag 5 stars because it does what it says it does but taking off a 1 star because price is IMO very steep for what it is. All that said I'm keeping it. I think I'll continue to have a use for it.”
Another reviewer stated,
“As a reference I'm using this with the Glock 34 for dry fire practice. Came across this from a Tactical Hyve youtube video, when looking for dryfire practice items. Looked like a great item and they had recommended it with the Mantis X system for Glock dryfire. Got the items and the dryfiremage works great when doing dry fire practice alone. But when using with the Mantis X system it's very hit and miss. Around 30-40% of the shots don't register with the mantis X10 system properly. I'll end up dry fire practicing 200 or so shots and only around 120-140 will register properly. There is also the part where sometimes the mantis x system will register to many shots (2 per trigger pull) due to there being and click on the pull and a click on the release of the trigger. As a note, when not using the dryfiremag the mantis X10 system I'm using picks up every one of my dry fire shots perfectly and haven't had an issue with any missed shots or multiple picked up. Using the dryfiremag separately it works perfectly and the click is audible. Default spring feels a bit lighter than my stock glock 34 trigger but close enough that it doesn't matter much.”
I initially had a similar experience with my Mantis X10 while testing the Dryfire Mag. After a few minutes of playing around with settings and mounting locations, I discovered the “SIRT/DFM” setting in the Mantis app. This setting was specifically designed to work with SIRT pistols and the Dryfire Mag by Mantis engineers. After switching over to that setting, the two worked together flawlessly.
The amount of math and engineering that goes into the motion tracking and vibration sensitivity of the Mantis is way above my pay grade. Thankfully, smarter people than me have worked out the various settings needed for dry, live, SIRT, DFM, C02, and more. Check out my full review of the Mantis X10 to learn more.
Frequently Asked Questions About The DryFireMag
Can I dryfire a Glock?
Yes, Glocks are safe to dry fire, with the exception of the .22 LR Glock 44.
Does dryfire damage my firing pin?
While most modern firearms can withstand dryfiring, it’s always best to consult your firearm’s manual. Utilizing snap caps or dry fire devices like the DryFireMag can help prevent potential damage. The only types of firearms I would not recommend dryfiring are anything that uses a rimfire cartridge, like a Ruger 10/22 or Glock 44, for example.
What guns shouldn’t be dryfired?
Typically, rimfire firearms like .22 calibers shouldn’t be dryfired without snap caps because the firing pin can strike the edge of the chamber, causing damage.
Can I use the Dryfire Mag with a Mantis X?
Yes, the Dryfire Mag can be used with the Mantis X2 and X10, but be sure to use the SIRT/DFM setting within the Mantis app for optimal performance.
Are dryfire systems worth it?
Dryfire systems are valuable tools for any shooter looking to improve their skills without incurring the ongoing costs of live fire practice. They allow for repetitive practice of core shooting mechanics.
Does DryFire Mag work with a laser?
Yes, the laser-enabled version of the DryFire Mag works with specific laser cartridges made by Laser Shot. Unfortunately, a standard DryFireMag will NOT work with any other laser cartridge on the market because it does not rely on the firearm’s striker to function. The laser bullet that comes with the laser-enabled version of the DryFireMag works with infrared light that flashes at the top of the magazine when the spring is depressed.
How do you change the “break” point of the DryFire Mag?
The break point can be adjusted using the built-in adjustment screws within the magazine. Refer to the user manual for detailed instructions.
How do you change the trigger weight of the DryFire Mag?
Much like the breakpoint, the trigger weight can also be adjusted using the provided tools and instructions within the user manual. If you need even more variable trigger weights, DryFireMag also offers optional spring kits for each of their DryFireMags.
Will the DryFire Mag damage my pistol’s firing pin?
No, the design of the DryFireMag ensures it does not interact with or damage the firing pin.
Will the DryFire Mag damage the trigger mechanism?
No, the DryFireMag is designed to work safely with the trigger mechanism of compatible firearms without causing damage.
Does the DryFire Mag perfectly replicate the feel of my trigger?
While the DryFireMag closely simulates the trigger pull and reset, the feel may vary slightly from your actual trigger due to differences in its internal mechanism. If you’re using a standard factory trigger, you likely won’t be able to tell the difference. If you’re using a high end competition trigger, the DryFireMag trigger pull will be heavier than you may be used to, even with the lightest spring installed.
Can I practice reloads with the DryFireMag?
No, the DryFireMag occupies the magazine well, preventing the practice of reload drills.
What laser systems work with the DryFire Mag?
The laser-enabled Sart DryFireMag is compatible with all of the laser-based dryfire training tools on the market (i.e. Mantis Laser Academy, LaserHIT, Smokeless Range, etc). DryFireMag offers the I-MTTS reactive target system on their website directly as well.
Where is the DryFireMag made?
The DryFireMag is proudly made in the USA, ensuring high-quality materials and craftsmanship. This domestic production also allows for better customer support and quality assurance for users.
What is the spring pack and do I need it?
The spring pack is an accessory available for the DryFireMag that allows users to adjust the trigger pull weight to more closely match that of their actual firearm. Whether you need it depends on how closely you want to replicate your firearm’s trigger pull during dry fire practice.
Will the DryFireMag work with the G Sight System?
If you have the laser-enabled version of the DryFireMag, it can work with the G Sight app. However, it will only function correctly with the included laser cartridge from Laser Shot. The DryFireMag does not release the striker to fire the laser, so standard laser bullets like those from G Sight will not work directly.
Can I use the Dryfire Mag with a shot timer?
Yes, combining the Dryfire Mag with a shot timer, like a PACT timer can help you measure and enhance your draw and shoot times during dryfire practice. You may run into some trouble depending on the sensitivity of the shot timer. Most of them rely on the sound of a shot to register correctly. Something like a Mantis X10 would work excellently as a shot timer along with a DFM.
Is there a specific setup to use the Dryfire Mag with Mantis X10?
What should I do if the DryFireMag does not fit my gun?
Each DryFireMag is designed to fit specific makes and models of handguns. If you have a Glock, a DFM designed for a Smith & Wesson will not fit properly, just like real magazines. Make sure to order the correct size DFM for your specific firearm. If you have any doubts or questions, reach out to DFM support for help.
How often should I practice with the DryFireMag?
Consistent practice is key. It is recommended to incorporate dryfire training with the DryFireMag into your routine several times a week, depending on your personal training goals and schedule.
Can I perform malfunction drills with the DryFireMag?
Unfortunately, no. The DryFireMag occupies the magazine well, preventing the execution of malfunction drills. Alternative methods or tools would be needed to practice these scenarios.
My Closing Thoughts
In conclusion, the DryFireMag is a highly effective tool for enhancing dryfire practice. By reducing the interruptions caused by manual slide racking and allowing continuous trigger pulls, it provides a more efficient and realistic training experience. While it does have some limitations, such as compatibility issues with certain laser devices and the inability to practice reloads, its benefits make it a valuable addition to any shooter’s training arsenal. Whether you are a beginner or an experienced shooter, the DryFireMag can help you improve your accuracy, speed, and overall proficiency with your firearm.
The DryFireMag is a game-changing tool for anyone serious about improving their shooting abilities. Its ability to facilitate continuous trigger practice without manual slide racking makes it an invaluable asset for both novice and seasoned shooters alike. By incorporating it with advanced training tools and techniques, you can make significant progress in your shooting skills without the high costs and logistical challenges of frequent range visits.
